Setup guide

Behringer X32

Set up basic X32 input-channel volume control on iPhone and iPad.

Before you start

Allow Church Remote’s Local Network permission and use a network that lets your phone or iPad reach the equipment. Guest Wi-Fi, isolation rules and VPNs can prevent a connection.

Add and use the device

1. Find the mixer’s current local IP address in its network settings and connect your phone or iPad to the equipment network.
2. Tap + → X32 and enter the mixer address. Keep the app’s default port unless your setup specifically requires another value.
3. Name the console and choose its location and room. Open the remote and select an input channel from 1–32.
4. Check the channel name and current fader reading before using the smaller volume steps. Test at a suitable time before a live service.

Connection help & limits

This integration currently targets X32 input-channel faders 1–32. Other mixer families and every console function are not included. If readings stop updating, reconnect before making another adjustment.

Discovery in the upcoming release

Internal build 26 also searches for X32/M32 mixer responses on active networks. Manual entry remains available. A matching advertised name is not permanent identity; verify changed addresses. Real-console acceptance remains separate from simulated tests.

Keep your equipment organized

Open Device Details to save a custom name and choose its location and room. Use names your volunteers recognize. Saved offline information is useful history; an online indicator is not a guarantee of physical power or output.

All setup guides · ProPresenter setup · Local equipment portals